|
|
Post by felipeintheend on Oct 31, 2017 22:12:30 GMT -6
Hello. I am using the "Beginner's Pool Mining Software" I have minned a few coins because I have installed it in the first minutes. But now it's going slow (Yeah I know thats ok). I have tried to mine throught "Windows Direct Miner" but it doesn't work. I have tried write _start_mining Wallet Address [<4>] and I get this msg error:  Does it worth to use or better keep with the Software? If so, how Can I fix the error? |
|
|
|
Post by xtophe on Oct 31, 2017 23:32:30 GMT -6
wallet_address thread
eg etnKPASDasdasdasdasds234uuhj432hjkkjhrjwkeh 4
|
|
|
|
Post by Imran309 on Nov 1, 2017 0:34:51 GMT -6
Im using the ETn Pool Miner with the GUI. It was simple. Enter the ETN wallet address, set the pool location and the threads.
For Mining port I believe if your processor has only SSe2 then use 3333, If it has AVX and AVX2 then use the Mid and highend ports.
I started to mine with High-end (7777) but the results were terrible. Then realized As I have a Xeon 5675, I dont have the AVX technologies in my processor. So chose 3333 with 22 threads (total 24 in my CPU) and it lifted off like a soyuz.
My internet has issues, else I wouldve tried with claymore.
Will keep you posted
|
|
|
|
Post by okane81 on Nov 1, 2017 1:41:47 GMT -6
if your cpu no aes and avx cannot mine cryptonight.
|
|
|
|
Post by okane81 on Nov 1, 2017 1:44:06 GMT -6
a better miner to use I think for is CCMINER version 2.2.2 at gtx1080 you have 520hs/s.
|
|
|
|
Post by gringo on Nov 1, 2017 4:19:16 GMT -6
what are peoples hashrates atm? I'm getting ~115 H/s on ma CPu and 436H/s on ma gpu i5 6600k, gtx 1060 , think I'm pretty happy with it, port changes dont seem to make a difference?
|
|
|
|
Post by Praveen on Nov 1, 2017 7:07:52 GMT -6
i7 6600k, gtx 960 giving 232H/s
|
|
|
|
Post by mrnewguy on Nov 1, 2017 12:00:40 GMT -6
what are peoples hashrates atm? I'm getting ~115 H/s on ma CPu and 436H/s on ma gpu i5 6600k, gtx 1060 , think I'm pretty happy with it, port changes dont seem to make a difference? i have the same cpu and gpu. for the guy having problems: why don't you just use the windows miner , since it was working for you? The speed it's the same for all the miner, unless you have some special CPU rigs |
|
|
|
Post by Eylok on Nov 1, 2017 12:23:37 GMT -6
Hi, I run CPU with the simple UI, how can i do GPU as well please?
|
|
|
|
Post by Eylok on Nov 1, 2017 12:41:24 GMT -6
|
|
|
|
Post by avendora on Nov 5, 2017 14:11:35 GMT -6
I downloaded the Direct Windows Miner, and generated a wallet address. But when I put the generated address in the miner, it kicks back saying wrong wallet format...
Any suggestions?
|
|
|
|
Post by needleandthread on Nov 5, 2017 15:04:39 GMT -6
Hi avendora, have you made sure there are no spaces anywhere in your pasted wallet address? Since the address is generated in three lines, if you copy and paste the whole thing straight up into your miner, there might be spaces in the beginning or in between (where the breaks in the lines were) |
|
|
|
Post by zerocool1974 on Nov 5, 2017 15:27:33 GMT -6
I use xmr-stak for cpu mining only and have good results, but it all depends to wich pool you are connected, the official pools are wasted try easyhash or hashparty for better results. And don't forget to activate large page support, it helped a lot to increase hashrate!
The config.txt is self explanatory and just reading it and filling the blanks and everybody will start mining in a few minutes.
|
|
|
|
Post by avendora on Nov 5, 2017 15:35:01 GMT -6
I was watching a video on it and realized that I was pressing Cntrl+V instead of Right clicking on the top of the miner and then Edit and then Paste. That solved the problem, and now I'm mining.
|
|
|
|
Post by mrnewguy on Nov 5, 2017 16:40:14 GMT -6
I was watching a video on it and realized that I was pressing Cntrl+V instead of Right clicking on the top of the miner and then Edit and then Paste. That solved the problem, and now I'm mining. ahah, that's comforting  |
|
